FEATURE:
An only substitute where blasting is not allowed
Hydraulic splitters can work under water without any modifications.
Two cylinders can produce up to 900 tons of splitting force.
Up to five splitters can be operated simultaneously on one pump.
Hydraulic Splitter
General Description
The Hydraulic Splitter works on the wedging principle. The wedges of splitter are inserted in pre drilled hole and out of the three wedges the center taper wedge is forced between the two counter wedges by hydraulic pressure forcing them apart. The pressure is transferred to the walls of the Hole (rock/concrete) developing a crack and split further. The important factors affecting Splitter speed and economics are the ‘Pre’ and ‘Post’ operations like Drilling and site cleaning.
Drilling
The primary operation while using Hydraulic Splitter is drilling. This is easier by the conventional method of pneumatic drilling with compressor & jack hammer (Drill rod of 800mm length and cross bit Dia. of 48mm.)
Splitting
After the drilling operation the splitter wedges (two counter wedges and one center wedge) are inserted in the hole. The control lever sets the forward stroke of the wedge movement. The hydraulic pressure pushes the center wedge forward forcing the two counter wedges to move outwards, exerting pressure of 415 tons (4045 kn) and split the material. Out the several advantages, the Splitter operation is as fast as 7-8 seconds per split, resulting a accelerated excavation speed
Salient Features
- Controlled directional cracking. The required direction of the crack can be obtained by just positioning the handle of the splitter in the direction of the required crack.
- Much faster and greater output as compared to the conventional Chiseling/Chipping method. As drilling is comparatively easier in Hard rock and the output is directly proportional to the number of holes Drilled.
- Noiseless, Environ-friendly and dust free operation.
- Single person operation.
Rugged Construction
Shrikrishna Splitters have a extremely rugged construction. Splitter can split in very tough situation and the reliability of it is exceptional. Its one of the plus point is maintenance free operation resulting in cost saving. Due to its compactness it will perform in smallest workplace in efficient way.
User Friendly
Splitters can be operated very easily. The unskilled site operator can easily learn to operate the splitter within a short time.
|
